Injection multi cavity mould for caps of packaging industry

     • This injection tool was made for bottle caps.      • 16 cavities with inside thread release by force.      • SPM finished this tooling very fast and shipped the mold after T1.      • Our biggest multi cavity tool is 32 cavities.      You are welcome to ask for quotes for these kind of moulds anytime,    quotation will be provided within 24 hours.

Products Details

Product Introduction

This is 16 cavity mould. Mould delivery after T1, finished in very short time. Because the inside thread needs to be released by force, we need to make sure there is no scratch mark when demolding and assure the filling is balance. The hot runner is 16pcs hot tips of master tip.


Appliance and Type Package, bottle caps
Part name queen_cap
Resin PP
No. of cavity 1*16
Mould Base DME 7# Equal /(AISI 420H)
Steel of cavity&Core S136 HRC48-50
Tool weight 613KG
Tool size 369X515X510
Press Ton T160
Mold life 1000000 Shots
Injection system 16 Drop hot runner
Cooling system 25 ℃
Ejection System Stripper Plate
Special points Multi cavity mold with 16 cavities, thread demold by force , mold ship after T1
Difficulties No scratch mark when mold release by force, keep filling balance, short lead time
Lead time 4.5 weeks
Package Anti-rust Paper and film, little anti-rust oil and plywood box
Packing items Certification of steel, final 2D & 3D tool design, hot runner document, spare parts and electrodes…
Shrinkage 1.016
Surface finish B-2
Trade terms FOB Shenzhen
Export to Australia


Suntime has very effective mold designers. For DFM, it can be finished within 1~2 days, 2D layout within 2~4 days, and 3D within 3~5 days depending on mold complexity. When time is very urgent, we normally make 3D drawing directly after DFM, but of course, it must be based on customers' approval.

Caps Mold Trial Video


3D mould design

DFM Analysis

DFM Analysis

3D mould design

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours